CABINETS ML

• Material: EN 1.4301 (AISI 304) stainless steel finely
glazed and protected 1 side.
• Container obtained from a single sheet with multibends shaping of the envelope front edge.
On the back: threaded blind holes for easy application of the wall mount system. Inside: M10 threaded pins for inner plate fixing
• Fairlead plate: not provided
• Blind door.
• Doorlock, twin-comb type, standardized, Ø 3 for Low-Tension, with outside surfaces of s/s
• S/s inner hinges: 120° opening as per CEI EN 602041 recommendations
• Maximum weight admissible on the door 12 kg.
• Seal of foamed polyurethane
• Inner plate: supplied on request only (see. ACCESSORIES)
• Pre-arrangement for earthing: as per applicable laws
• Protection degree: IP66

CABINETS MV

• Material: EN 1.4301 (AISI 304) stainless steel finely glazed and protected 1 side.
• Container obtained from a single sheet with multibends shaping of the envelope front edge. Back: threaded blind holes for easy application of the wall mount system. Inside: threaded pins M10 for possible fixing of the inner plate
• Fairlead plate: not provided
• Door with 3+3-layer shatterproof glass (in compliance with the applicable accident prevention rules). The sightglass is made of polycarbonate for models MV034
• Doorlock: twin-comb type, standardized type Ø 3 for Low Tension, with outside parts made of s/s.
• S/s inner hinges: 120° opening according to CEI EN 60204-1 recommendations.
• Seal of foamed polyurethane
• Inner plate supplied on demand only (see ACCESSORIES)
• Pre arrangement for earthing: as per applicable laws
• Protection degree: IP66

CABINETS SERIES QL

• Material: stainless steel EN 1.4301 (AISI 304) or EN 1.4404 (AISI 316L) finely glazed and protected 1
side.
• Container obtained from a single sheet with multibends shaping of the envelope front edge.
• Fairlead plate not provided.
• Blind door.
• Doorlock with twin-comb mapping, standardized type Ø 3 for Low Tension, with outside parts of s/s.
• S/s inner hinges, 120° opening according to CEI EN 60204-1 recommendations.
• Maximum weight admissible on the door: 12 kg.
• Seal of foamed polyurethane
• Inner plate of sendzimir EN 10142 galvanized sheet, secured to the bottom of the cabinet by s/s
stud bolts, and resting on suitable ABS supports relieving the stud bolts from the weight of the plate and the installed equipment
• Pre-arrangement earthing as per applicable rules.
• Protection degree: IP 66 for cabinets with 1 door; IP65 for cabinets with 2 doors.

CABINETS SERIES QV

• Material: EN 1.4301 (AISI 304) finely glazed and protected 1 side.
• Container obtained from a single sheet with multibends shaping of the envelope front edge.
• Fairlead plate : not provided
• Door with 3+3-layer shatterproof glass (pursuant to the applicable accident-prevention rules). The sightglass is made of polycarbonate for models QV33- QV34-QV43.
• Doorlock: twin-comb, standardized type Ø 3 for Low Tension; outside parts made of s/s.
• Inner hinges made of s/s: 120° opening according to VDI 3231 recommendations.
• Seals of foamed polyurethane
• Inner plate made of sendzimir EN 10142 galvanized sheet, secured to the bottom of the cabinet by
s/s stud bolts and resting on suitable ABS supports relieving the stud bolts from the weight of the plate and the equipment applied.
• Pre-arrangement earthing as per applicable rules
• Protection degree: IP66

CABINETS SERIES QLP

• Material: EN 1.4301 (AISI 304) stainless steel finely glazed and protected 1 side.
• Container obtained from a single sheet, multi-bend shaping of the envelope front edge.
• Fairlead plate with seal (only for cabinets h1200 - h1600).
• Blind door - reversible
• Doorlock: twin-comb type standardized type Ø 3 for Low Tension. Outside parts made of s/s and glass-weighted black polyamide
• S/s inner hinges: 120° opening as per VDI 3231 recommendations.
• Maximum weight admissible on the door: 12 kg.
• Seals made of foamed polyurethane
• Inner plate made of sendzimir EN 10142 galvanized sheet secured to the bottom of the container by
s/s stud bolts, and resting on special ABS supports relieving the stud bolts from the weight of the plate
itself and the installed equipment.
• Pre-arrangement for earthing as per applicable rules
• Protection degree IP66 for cabinets with 1 door, IP65 for cabinets with 2 doors

CABINETS SERIES QVP

• Material: EN 1.4301 (AISI 304) stainless steel finely glazed and protected 1 side.
• Container obtained from a single sheet with multibends shaping of the envelope front edge.
• Fairlead plate: with seal
• Reversible door with 3+3-layer shatterproof glass (in compliance with the applicable accident prevention rules).
• Door lock with twin comb mapping, standardized type Ø 3 for Low Tension, with outside parts made of s/s.
• S/s inner hinges of s/s, 120° opening as per CEI EN 60204-1 recommendations
• Seals of foamed polyurethane
• Inner plate of sendzimir EN 10142 galvanized sheet secured to the bottom of the container by stud bolts of s/s and resting on special ABS supports relieving the stud bolts from the weight of the plate itself and the equipment installed
• Pre-arrangement for earthing as per applicable rules
• Protection degree IP66